| Overall
Gain |
Adjustable
for each input ± 20 dB relative to unity gain
(0 dB) in 0.5 dB increments |
Input
Impedance Unbalanced
Balanced |
Adjustable
for each input
36k or 600 Ohms
36k or 600 Ohms |
Output
Impedance Unbalanced
Balanced |
40 Ohms
80 Ohms |
| Maximum
Input Level |
13
volts RMS at 0 dB gain |
| Maximum
Output Level |
13
volts RMS at (24 dBM) |
| Output
Noise Level |
10
microvolts, 20 to 20 kHz bandwidth, 0 dB gain |
| Signal
to Noise Ratio |
>
96 dB |
| Channel
Separation |
>
100 dB, @ 20 to 20 kHz bandwidth |
| Frequency
Response |
5 Hz to 160 kHz, -3dB |
Total
Harmonic Distortion (THD) & noise |
0.0012%, 10 volt output, 600
Ohm load |
Gain
Range |
63.5
dB, 127 equal increments |
| Gain
Resolution |
0.5 dB ± 0.03 dB over
entire range |
Channel
Balance |
± 0.03 dB throughout
entire range |
Dimensions |
17.5
in.W x 6 in.D x 3.15 in.
H 44.5cm W x 15.25cm D x 8cm H |
Weight |
24
lbs. (11 kg) |
|
FEATURES:
- Five balanced XLR inputs per channel. Balanced XLR main
and record outputs. One balanced XLR “bypass”
input per channel for use in home theater installations.
-
All inputs and outputs can be used with single-ended RCA
terminated interconnects by using XLR / RCA adapters (one
male stereo pair and one female stereo pair supplied).
-
Independent Listen and Record functions on each input
permit simultaneous listening and recording from any two
selected inputs.
-
Each input can be individually adjusted for R/L balance,
mono/stereo, absolute phase, input impedance and gain,
exclusively independent of every other input. Individually
adjusted input settings are automatically memorized and
recalled when returning to that input.
-
Six function hand-held IR remote control with IR receiver
/ volume display unit located in companion power supply
for volume level indication.
-
All operational functions under microprocessor control.
Within five milliseconds of any function selected, the
microprocessor reverts to a non-clocking “sleep”
mode which eliminates any possibility of digital noise
contamination.
|
